PORSCHE 924 RS ENGINE MOUNT KIT
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Stoptech big brake kit front slotted red caliper Porsche 996 Carrera s 2005
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that o...(choose a part on the right to read more)
General Fitment 911 2005-08
$3,666.60
Make a selection
Stoptech big brake kit front slotted red caliper Porsche 997 turbo 2007
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that optim...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$3,882.60
Make a selection
Stoptech big brake kit rear drilled yellow caliper Porsche 997 GT3 rs 2007
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that op...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09
$3,126.60
Make a selection
Stoptech big brake kit front drilled yellow caliper Porsche 997 turbo 2007
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that op...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$3,882.60
Make a selection
Stoptech big brake kit front drilled red caliper Porsche 996 Carrera 4s 2005
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that ...(choose a part on the right to read more)
General Fitment 911 2005-08 911 TURBO/GT2 2001-05 911 2009-12
$3,666.60
Make a selection
Stoptech big brake kit front slotted black caliper Porsche 997 GT2 2008
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that optim...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09 911 GT3 2007-11
$3,882.60
Make a selection
Stoptech big brake kit front slotted black caliper Porsche 996 Carrera 4 2004
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that...(choose a part on the right to read more)
General Fitment 911 1998-05 911 2005-08
$3,126.60
Make a selection
Stoptech big brake kit rear slotted black caliper Porsche 996 GT2 2004
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that optima...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 911 GT3 2003-05
$3,126.60
Make a selection
Agency power has developed a new cold air intake kit for the v8 Porsche Cayenne. dubbed "the stealth" system, the agency power cold air intake adds power to your Cayenne s or GTS from 03-11. the intake kit is designed to replace the entire factory airbox from the maf tubes to the filter. each intake tube is hand made here in the usa using precision jigs with 6061 aluminum that is tig welded. the intake tubes attach to the factory maf sensor with the supplied silicone coupler. each intake tube features a custom spec'd K&N cone filter with front inlet to draw air in from the OEM ducting. because of the close proximity to the engine, we also include OEM mounted heat shields that securely connect the intak...(choose a part on the right to read more)
General Fitment CAYENNE 2007-10 CAYENNE 2003-06
Agency powers exhaust system for the 997.2 features high quality and tuned mufflers in addition to the high flow xpipe in the kit. The exhaust has been tuned to produce an incredible race tone without a lot of drone found in similar designs. The exhaust fits with the agency power dual exhaust tips or stock tips as pictured. Since this retains the primary catalytic converters, t here are no check engine light or emissions issues.
The entire exhaust is 304 stainless steel and polished to a show finish. It uses the OEM mounting points and hardware.
General Fitment 911 2009-12
$1,349.95
Make a selection
Want to replace your battery tray and support, but you see the shelf under it is rusted? You need our replacement shelf. We manufacture this great item, which also mounts the fuel pump and holds the engine to body seal. Easily welded in, it completes a perfect battery area repair. Order some new fuel pump mounts and fuel line grommets while you are at it, and coat with por 15 rust conversion paint before top coating.
Kit consists of:
1 - b91450104411 - right rear suspension console - normally $255.00
1 - b91450143612 - engine shelf; 914 1970-76 passenger side - normally $199.99
General Fitment 914 1970-76
Brombacher racing exhaust system for 997gt3/rs with 90mm x 2 round tips
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (23 kg)
- 44.5 lb (19 kg) savings over stock system!
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary on 997.2 GT3
The FVD GT3 race exhaust gives the 997 GT3 a more pronounced, aggre...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $6,698.73
Make a selection
Brombacher racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- bypass-catalytics
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (19 kg)
- 44.5 lb (20 kg) saving?s over stock system!
- t 316 stainless steel for improved durability over t 304
- reuse?s factory center muffler for backpressure and resonance dampening.
- includes all necessary clamps and mounting brakets
- made in Germany
- 106 db
- intoxicating growl at idle, partial throttle and wide open throttle
- reuse?s factory tips or larger aftermarket tips
- dme programming necessary 2nd gen
The FVD...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $3,177.67
Make a selection
The perfect compromise for you and your loved ones. Rich, deep race car tones with the valves open and soft subtle, completely stock sounds with them closed. Torque is better than our other systems in the low range with the valves closed and horsepower is better with the valves open. Made for mid-range and top end performance with the added beauty of 3.5" (90mm) dual exhaust tips! + 27 crank hp & +25 crank torque (on average). - 2.9 tubing (75 mm) at the widest point. Primaries are 2.5" (64mm). - 200 cell hjs "hf" trimetallic catalytic converters. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - 3.5" (90 mm) dual oval, double walled polished tips included. - dual high quality ...(choose a part on the right to read more)
General Fitment 911 1994-98
From $11,730.62
Make a selection
Many pre. 1977 Porsche 911's are not equipped with factory oil plumbing (hard lines and thermostat). In this case fitting an oil cooler requires making a hose run from the rear to the front of the vehicle and back. We find the easiest and most cost effective method of plumbing is to duplicate the factory plumbing route using aeroquip hose and fittings with a mocal oil thermostat and oil cooler. The various kits that we offer to accomplish this task include; one of a number of oil cooler options (some are suitable for both fender or front spoiler location), mocal -12 an oil thermostat with mounting bracket, 30 foot length of aqp -12 an stainless braid 3/4" id hose, 30 mm metric to -12 an adaptors for the oil t...(choose a part on the right to read more)
General Fitment 911 1974-77 911 1965-69 911 1970-73 928 1978-82
$1,090.00
Make a selection
Brombacher racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell hdl German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (19 kg)
- 44.5 lb (20 kg) saving?s over stock system!
- t 316 stainless steel for improved durability over t 304
- reuse?s factory center muffler for backpressure and resonance dampening.
- includes all necessary clamps and mounting brakets
- made in Germany
- 106 db
- intoxicating growl at idle, partial throttle and wide open throttle
- reuse?s factory tips or larger aftermarket tips
- dme programming not ne...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $4,665.10
Make a selection
Brombacher race exhaust system with valves for 997 GT3/rs with 2 x 90mm tips
Facts:
- + 25 crank hp & + 18 crank torque with valves closed
- 200 cell high flow, tri metal German hjs ?hd? Sport catalysts**
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 37.2 lbs. (16.9 kg) this is the lightest valved system in the Brombacherline !**
- 49.3 lb (22.3 kg) saving?s over stock system!**
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- made in Germany
- 110 db with valves open (not for faint of heart!)
- 103 db with valves closed
- intox...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,702.68
Make a selection
Many pre. 1977 Porsche 911's are not equipped with factory oil plumbing (hard lines and thermostat). In this case fitting an oil cooler requires making a hose run from the rear to the front of the vehicle and back. We find the easiest and most cost effective method of plumbing is to duplicate the factory plumbing route using aeroquip hose and fittings with a mocal oil thermostat and oil cooler. The various kits that we offer to accomplish this task include; one of a number of oil cooler options (some are suitable for both fender or front spoiler location), mocal -12 an oil thermostat with mounting bracket, 30 foot length of aqp -12 an stainless braid 3/4" id hose, 30mm metric to -12 an adaptors for the oil ta...(choose a part on the right to read more)
General Fitment 911 1974-77 911 1965-69 911 1970-73
"brombacher" exhaust system for 997 GT3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up for maximum torque gain
- weighs 71 lbs. (32,2 kg),
- 15.5 lb (7 kg) weight savings over stock
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- 2 x 3.5"(90mm) round center exit tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$8,507.40
Make a selection
Ksports circuit pro damper system provides the ultimate in adjustability for enthusiasts and professionals alike, who are wishing to have the maximum in performance and durability. With years of engineering, testing and development, the circuit pro damper system has been perfected in virtually every facet of motorsports, ranging from drifting to time attack or circuit driving. The uncompromising range of adjustability on the circuit pro damper system makes it possible to win at the track, yet drive daily on the street as well.
The key component to the circuit pro damper system is its utilization of remote reservoirs that provide separate adjustments for rebound and compression, as well as nitrogen gas pre...(choose a part on the right to read more)
General Fitment 911 1998-05
$2,856.60
Make a selection
The oil cooler suffers from exposure to road debris, the elements and corrosion with age. It is a critical engine component, that should be replaced when any leaking is detected. This kit is ready for installation with oil cooler, oil pipes, new rubber mounts, brackets and an oil drain plug. It is a high-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. This kit is a direct replacement kit for original part # 930 207 053 00 and current part # 93020705304. Complete the installation with our complete stoneguard kits part # FVD20705301 and FVD20705302
This item may need to be sourced from Germany and would take 2-4 ...(choose a part on the right to read more)
Product details:
High performance intercooler upgrade engineered for optimum flow efficiency lowers intake temperature and improves flow for maximum power gains
Features:
-fits all Porsche 911 turbo 930 vehicles (1976-1989)
-available for factory OEM turbo or upgraded k27 turbos
-increases horsepower and torque by 40 whp and 29 ft-lbs
-flow as much as 900 cfm @ 2.6/1 pr ratio with less than 1 psi drop
-cubic inch mass increase from 258 (oem) to 650
-c2 turbo long-neck style with no o-rings for a leak proof charge.
-intercooler kit includes bypass valve, bypass sleeve, rubber elbow, 5-ply silicone hoses, and all mounting ha...(choose a part on the right to read more)
General Fitment 911 1987-89 911 1984-86 911 1978-83 930 1975-77
$2,395.00
Make a selection
Since the Boxster is a mid-engined, water-cooled car, adequate cooling is a prime concern. When driven in competition situation, 2.5l and 2.7l cars can often overheat and do damage to the very expensive engine. This water cooling kit adds an extra center-mounted radiator to the front of your Boxster and really aids in keeping engine temperatures down, even during spirited driving. These cooling kits can drop coolant temperatures by as much as 60ยบ f and keep your engine at a very safe operating temperature. Comes with all hoses and hardware as well as a Boxster s style front grille bezel.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Ple...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,096.34
Make a selection
This oil cooler kit is a must for engines that are modified. It reduces oil temperature and protects the engine. This kit can lower operating oil temperature up to 60* f. Simple installation without cutting or modifying. High quality behr cooler ensures reliability without sacrificing a/c performance as kit is mounted clear of the front a/c condenser. Can be mounted on cars with or without air conditioning. Sold as a complete kit, ready for installation.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$2,981.77
Make a selection
Kit includes:
Software fast load, sport air filter, sport muffler set " brombacher" , mounting kit muffler, ipd with 82 mm throttlebody.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3600ccm
Compression ratio - 11,7:1
Max. Power - 280kw (381hp) @ 7400rpm
Max. Torque - 385nm (284lbf ft) @ 5000rpm
Max. Speed - 312km/h
Max. Rpm - 8000rpm
Acceleration 0-100km/h - 4.6s
Tuning:
Max. Power - 294kw (400hp) @ 7500rpm
Max. Torque - 415nm @ 5000rpm
Max. Speed - 315km/h
Max. Rpm - 8200rpm
Acceleration 0-100km/h - 4.3s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to ou...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05
$6,364.33
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|